House placement question

Discussion in 'Renaissance Discussion' started by Orion GM BD, Mar 18, 2021.

  1. Orion GM BD

    Orion GM BD Well-Known Member

    Joined:
    Dec 21, 2013
    Messages:
    654
    Likes Received:
    337
    I want to replace a large smithy with a tower. I marked it out and all. Had a tower on this spot before [not here].
    Only difference is there is a small stone tower to the east and it looks like the wing is close to being over it. Somewhere I remember
    that if there is was a small under where the wing is, you have to drop the small to place the tower.

    Anyone have an issue with this?

    Thanks in advance!
  2. Blendax

    Blendax Well-Known Member
    UO:R Donor

    Joined:
    Sep 18, 2017
    Messages:
    1,856
    Likes Received:
    1,255
    I think as long as the proper spacing is maintained (1 space east-west, i believe) ... you should be ok. I *highly* recommend you test it out on the test server, first ... if you're concerned someone might try to gank your spot while you're attempting to place.
    Orion GM BD likes this.
  3. Chris

    Chris Renaissance Staff
    Renaissance Staff

    Joined:
    May 14, 2012
    Messages:
    3,385
    Likes Received:
    6,195
    In some rare cases the roof overhand on the west side of a house can require an additional space depending on the house that is located on that side. However if a tower fit in the spot before there should be plenty of room.

    I can take a look at the spot on test center if you ping me on discord while you are there.
    One and Orion GM BD like this.
  4. Blendax

    Blendax Well-Known Member
    UO:R Donor

    Joined:
    Sep 18, 2017
    Messages:
    1,856
    Likes Received:
    1,255
    [​IMG]

    Pretty much exacly how I imagine @Chris is.
    Reginald, Orion GM BD and ReZon like this.
  5. Orion GM BD

    Orion GM BD Well-Known Member

    Joined:
    Dec 21, 2013
    Messages:
    654
    Likes Received:
    337
    I will get on test and see what happens.

    Thanks for the response @Blendax and @Chris. Will hit you up if I have trouble.

    Cheers!

Share This Page